(Distributed) Denial of Service Attack: Definition & Prevention
Table of Contents
- Denial of Service: Definition
- What Is Denial of Service?
- What Is a Denial of Service Attack?
- What Is a Distributed Denial of Service Attack?
- Denial of Service Attacks: How Dangerous Are They?
- Denial of Service Attack Protection
Denial of Service (commonly referred to as DoS – not to confuse with MS-DOS) describes a situation where an application or service is not reachable for its intended audience anymore, ie. it “denies service”.
So the definition of Denial of Service is simply that a service or application that’s usually reachable is not reachable – likely because of an attack and not a simple bug – we’ll go into more detail about this later on.
We already discussed the definition of Denial of Service (DoS) above. Let’s continue with why and how an online service would experience a DoS.
The reason of a Denial of Service can simply be a random malfunction of the service or application or a malfunction triggered by an exploit. For example, a person with malicious intent would send a specifically crafted command to the application designed to make it crash, effectively resulting in a Denial of Service.
However most bugs that would result in a DoS get fixed sooner than later. That’s why the bad guys instead take advantage of flaws in the TCP, UDP, and other network protocols to make an intended target unreachable to its audience.
So, while Denial of Service simply defines the unavailability of a service that’s normally available, it mostly refers to attacks carried out over networks such as the internet that are designed to take the target offline. Let’s check this out in more detail.
The best way to define a Denial of Service attack (DoS attack) is that it’s a type of cyber attack that aims at making a particular target service unreachable to its audience. Because DoS vulnerabilities in applications are not too common and for the most part get patched rather quickly, most Denial of Service attacks are carried out by taking advantage of flaws in network protocols.
A simple Denial of Service attack usually originates from a single or very few sources – the source normally being a server or PC connected to the internet. A DoS attack normally aims at vulnerabilities in an application that would result on a DoS or tries to overload CPU or RAM resources of the target machine.
In some cases a single attack source can also have larger resources, such as a 10Gbit/s internet connection, which would allow the attacker to instead of aiming at the application itself, just hammer the victim with more network traffic than it can handle. If the target machine has only say a 100Mbit/s connection and the attacking machine has a 10Gbit/s, it will be easy to clog the network, rendering the victim unreachable over the internet.
If the Denial of Service attack targets the CPU and RAM resources, the attacking machine would usually flood the victim with requests, such as HTTP requests if the target is a website, in order to exhaust the resources of the server the website is running on.
Generally, there are two types or kinds of Denial of Service attacks, which are:
- Network Layer Attacks (Layer 3 and Layer 4)
- Application Layer Attacks (Layer 7)
Network layer attacks target layer 3 and 4 of the OSI model and as the name suggests they try to exhaust the network capacity of a victim, which can be the uplink capacity, the network interface controller capacity of the server or also the number of packets that the TCP/IP stack of the operating system of the server can handle.
Application layer attacks usually target the application itself that the attacker wants to make unreachable. This happens by sending seemingly legitimate requests to the application that it processes as if they come from legitimate users. The attacker usually sends that many of such requests, that it’s as if your application would have many thousands of users at the same time that it has to handle instead of a few, effectively exhausting all CPU and RAM resources of the server.
There are many many different subtypes of network and application layer attacks. Most of them are Distributed Denial of Service attack types, which is why we’ll look at them in the next chapter.
While a simple Denial of Service attack originates just from one single or very few sources, a Distributed Denial of Service attack (a.k.a. DDoS attack) originates from a network of many sources, often many thousands. In simple terms, the best way to define a DDoS attack is that it’s a DoS attack originating from many different distributed attack sources (IP addresses).
This network of attack sources is often a so-called botnet, which describes a network of infected computers and/or servers that are in control of a hacker. The hacker can control all of the infected machines from a so-called Command & Control server (CnC or C&C) and make them for example simultaneously send HTTP GET requests to a target, which would be a form of layer 7 DDoS attack.
Distributed Denial of Service attacks can do much more harm than a simple Denial of Service attack. That’s because it often involves way too many attack sources – effectively source IP addresses – to simply block the source IP(s) with a firewall or ACL. Their size is often tremendous and can take down whole networks or data centers, which makes them difficult to combat.
Let’s look more closely at what types of network and application layer attacks can be used as part of a (Distributed) Denial of Service attack.
There are basically two subsections that network layer attacks can be split into.
- High Volume Attacks
- High Packet Count Attacks
The high volume network layer attacks mostly aim at exhausting the network capacity of a server or the network segment of one (read access or distribution switch). These attacks are mostly using the UDP protocol because that allows a variety of amplification DDoS attacks and also makes it possible to send large single packets to a target IP.
Those volumetric attacks are usually measured in bits, such as Megabits per second and Gigabits per second. There are volumetric DDoS attacks ranging from 50Mbit/s to 400Gbit/s, the latter mostly being reflection attacks (a.k.a. DrDoS – Distributed Reflected Denial of Service).
Common UDP-based High Volume DDoS Attack Types:
- DNS Amplification
- NTP Amplification
- SNMPv2 Amplification
- NetBIOS Amplification
- SSDP Amplification
- CHARGEN Amplification
- QOTD Amplification
- RIPv1 Amplification (NEW)
- Multicast DNS (mDNS) Amplification DDoS (NEW)
- Portmap Amplification DDoS (NEW)
- Direct UDP Flood
We can’t cover how each attack works exactly, however Distributed Reflected Denial of Service attacks usually take advantage of UDP-based online applications that send back a large request to a small query.
The attacker would typically spoof (meaning “fake”) his IP address to make it look as if the network packets that the attacker sends originate from the victim’s IP address. Now if the attacker sends many small packets requesting a larger response from one of the above listed vulnerable applications, the application will send back the response to the victim’s IP address, because it thinks the victim requested the data, where in fact it didn’t but the attacker did by spoofing the IP address of the victim.
This results in an amplification of attack power, because very small requests result in rather large responses, meaning the attacker needs few resources to send the fake requests while the responses to those requests exhaust the resources of the victim quickly due to them being multiple (up to 20 or more) times larger.
Common TCP-based High Packet Count DDoS Attack Types:
- SYN Flood
- SSYN Flood (Spoofed SYN Flood)
- SYN-ACK Flood
- ACK Flood
- TCP Fragment Flood
- TCP-RST Flood (TCP Reset Attack)
- TCP Flag Abuse Flood
TCP-based Distributed Denial of Service attacks usually involve a high amount of packets per second being sent to the victim’s IP address. The packets are generally small but plenty. They usually don’t overwhelm the throughput of a network as UDP-based Distributed Denial of Service attacks do, but they can still easily make a server’s network card go down and overload the operating system’s TCP/IP stack.
The amount of packets per second commonly gets counted in Kpps (kilo/thousand packets per second) and Mpps (million packets per second). TCP-based attacks with as little as 50Kpps (50,000 packets per second) can already take down servers or applications on the targeted port and many attacks range up to 8Mpps (8 million packets per second) and more.
To fully understand how and why TCP-based attacks work so well in bringing down targets, you have to dig deep into how the TCP protocol and especially the TCP handshake works. This is out of the scope of this article, but it’s a good start to read what Wikipedia has to say about it if you want to dig deeper.
While a network or transport layer attack mostly aims at the IP address and the server as a whole, an application layer DDoS attack directly targets the application that the attacker wants to make unavailable.
This type of attack aims at exhausting the CPU and RAM resources of the server(s) an online application such as a website is being hosted on, by basically simulating a tremendous amount of users until there are no resources left to handle the requests of the actual users.
Layer 7 DDoS attacks are one of the hardest Distributed Denial of Service attacks to detect because the malicious requests often imitate the ones of legitimate users of the application, which can make it very hard to distinguish between what’s real traffic and what’s malicious traffic.
Common Layer 7 DDoS Attack Types:
- HTTP GET Flood
- HTTP POST Flood
- HTTP HEAD Flood
- HTTP Connection Flood
As you may notice all of the listed application layer attacks utilize the HTTP protocol. That’s because HTTP floods are by far the most common type of layer 7 attacks. There are however more types of layer 7 attacks out there that speak the protocol of the application they target.
The effectiveness of HTTP floods can be dramatically increased by sending the malicious requests to particularly resource hungry parts of the web application, such as search forms or login pages.
Application layer DDoS attacks often originate from botnets, but during the past couple of years there has been a huge increase in layer 7 attacks that originate from outdated and exploited WordPress and Joomla! installations. The name of a very popular exploit toolkit to infect such outdated CMSes and abuse them for layer 7 attacks is itsoknoproblembro, which has been broadly used to execute HTTP GET and POST flood attacks.
Another very common method of starting HTTP floods is to abuse the Pingback (XML-RPC) feature of the WordPress CMS. We recently covered the anatomy of WordPress Pingback DDoS attacks and how to mitigate it with NGINX.
Very. A Denial of Service attack can easily bring down any unprotected online service. The threat of Denial of Service attacks (the distributed ones in particular) is increasing dramatically. The reasons for that increased danger is that Distributed Denial of Service attacks get cheaper and easier to initiate every day.
You don’t have to be a geek anymore or know anything about how a network, a network protocol or the DDoS attack works – all it takes is a PayPal account, an internet connection and the ability to read and follow simple instructions. Often the dumbest people are the most dangerous and even they can effortlessly bring down your online service nowadays if you don’t have an effective DDoS mitigation strategy in place.
Did you know that you can rent DDoS as an online service (a so-called booter) that supports a variety of different attack types, including layer 7 attacks and can bring down almost every defenseless website for as little as $5 per month?
Common Motives of DDoS Attackers:
- Hacktivism – People who take down online presences “for the greater good”, or at least they think they do.
- Vandalism – People who take down online services “for the lulz”.
- Revenge – Got banned on a forum? Why not DDoS the heck out of it to show them.
- Extortion – If you don’t pay us $$$, your online service won’t be online again any time soon!
- Competition – If it just costs 5 bucks, why not take all your direct competitors offline to swiftly increase sales?
- Politics – Yes, it’s actually common that people and groups of people get attacked for political reasons by another party.
This should answer the question whether Distributed Denial of Service attacks are a threat. They definitely are very dangerous to every type of online service, be it a website, a game server or an e-mail server or anything else that’s connected to the internet. Even your home connection can become the target of a (D)DoS attack.
After reading through all this scary stuff you might ask yourself how you can protect your online service from Denial of Service attacks.
The first rule of Denial of Service attack prevention is: Don’t be a jerk. Seriously, we see a lot of “revenge attacks” on forums and other websites because people badmouth other people or groups of people. So not being a jerk might already decrease the chances of someone attacking your online presence.
Of course, this strategy won’t work if your competitors are criminals, you’re the victim of extortion, are into politics or work in the financial sector (which is the one receiving the heaviest DDoS attacks by the way).
So how do you effectively defend against DDoS attacks?
An effective Denial of Service attack prevention strategy starts at the network design and ends at your application’s code. This means that the first step is to pick a data center that has the capacity to swallow huge amounts of attack bandwidth without getting a hiccup.
There are data centers and hosting providers that specialize in designing networks that are resilient to Distributed Denial of Service attacks. Even if a provider has enough bandwidth capacity, all that traffic still has to be scrubbed to filter out the bad attack traffic until only the legitimate traffic remains when it reaches your application.
Due to the sheer volume of most attacks, it’s impossible to filter all of them directly on your server. It requires special access control lists (ACLs) set up on the routing equipment (ideally at carrier level) and a bunch of high-capacity DDoS mitigation devices that are basically firewalls with say a capacity of 30Gbit/s each particularly designed to detect and filter DDoS traffic. This usually involves a huge investment for the service provider.
A setup like this will make all servers hosted inside the network immune to DDoS attacks because they get filtered out before they can reach the servers or the application. Renting or housing your hardware at such a secure facility will keep you safe and sound from those cyber villains. Often it’s more cost-efficient to go with a small VPS with included DDoS protection instead of a whole protected dedicated server. For example, you can setup your own tunnel on it to protect a remote location.
If you don’t want to move your data and hardware to a different facility, there is also something called remote DDoS prevention, that makes it possible to remotely protect applications from attacks by routing the traffic through a DDoS scrubbing center that then sends back the clean traffic to your insecure location.
In any case, it’s unfortunately often more costly to stop DDoS attacks than to initiate them, making the threat even more real and an obstacle for many online startups. JavaPipe contributes to a safer online world as a DDoS protection provider that offers business-grade DDoS prevention solutions for small money to support the needs of startups and small businesses.
Terms That This Article Explains
Below is a short list of terms that you might be looking for and that this blog post explains in detail:
- Define DDoS
- DoS Attack Definition
- Define a DDoS Attack
- Denial of Service Definition
- Define a Denial of Service Attack